1. The engine of Furidi is a domestic engine. The Furidi, which participated in the C-NCAP test, was officially launched in June 2009. The Furidi is equipped with front dual airbags and ISOFXI devices. The front seat belts have pre-tightening and force-limiting functions, and the driver's seat is equipped with Fully equipped with a reminder device.
2. It is not considered imported. It's 6Y shackles. It is much more powerful than the ordinary 6 naturally aspirated. It also saves fuel.
3. Kia FordDi is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
4. Hello, this is a domestic engine. I wish you a pleasant drive.
1. Fredi provides two engine options. Among them, the maximum power of the 5L naturally aspirated engine is 82 kW, and the maximum torque is 148 N·m, which is matched with a 5-speed manual or 4-speed automatic transmission; the maximum power of the 5L turbocharged engine is 110 kW and the maximum torque is 210 N·m, which is matched with a 6-speed manual or 6-speed automatic transmission.
2. Yes. Kia Ford is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
3. The turbocharged engine is actually more suitable for driving on city roads, which can output the maximum torque at very low speeds. However, the maintenance cost of the naturally aspirated engine is lower, and the reliability and durability of this engine are also better.
4. The original oil label of Kia Fredi is 5W40, and 10W40 can also be used, mainly depends on the environment of the owner. If the temperature is below -25°C, it is recommended to use 5W40 model oil. Self-priming engines do not have high requirements for oil. Mineral oil and semi-synthetic oil can be used. If you have a large budget, you can use fully synthetic oil.
5. I agree that turbocharging is conducive to improving combustion quality, reducing emissions and improving engine power! However, because the turbocharger and the engine are two power machines of different nature, they are connected by in and out, attention should be paid to the mutual influence of their respective properties and the impact of the matching on the performance of the whole machine.
6. Geely Binyue is a very good small SUV. It is equipped with 0T and 4T power, and the overall performance is relatively smooth. The power performance is quite good. It should be noted that its speed can reach 190km/h.
Kia Fredi idling jitter shutdown, the reason for the engine jitter: the engine foot glue is aging or loose. The foot glue is the rubber block cushioned between the engine and the frame. Its function is to reduce the vibration and buffering of the engine during work, and to fix the engine.
The reason for stepping on the brake idling jitter and turning off the engine: the idling switch does not close fault analysis: when the idling contact is disconnected, the ECU determines the startThe machine is in a partial load state. At this time, the ECU determines the fuel injection volume and fuel injection time according to the air flow sensor and the crankshaft position and speed signal.
The reasons are as follows, which may be caused by too much carbon in the engine.
No idling speed may be due to the fact that the throttle valve is too dirty, causing the engine to have insufficient air intake and then turn off. Brother, is there anything wrong with the car inspection? I'm in the situation now. It takes too long to start the car with one click. Gear D waits for the traffic light, and the engine shakes twice and the engine turns off.
Shaking when idling in the morning. The hot car has improved. Phenomenon: When the car is launched in the morning, the engine shakes more than normal, and sometimes there will be a problem of not being able to start. Reason: It is possible that the throttle valve is too dirty, and there is too much carbon accumulation in the fuel injector and intake duct.
Binance wikipedia-APP, download it now, new users will receive a novice gift pack.
1. The engine of Furidi is a domestic engine. The Furidi, which participated in the C-NCAP test, was officially launched in June 2009. The Furidi is equipped with front dual airbags and ISOFXI devices. The front seat belts have pre-tightening and force-limiting functions, and the driver's seat is equipped with Fully equipped with a reminder device.
2. It is not considered imported. It's 6Y shackles. It is much more powerful than the ordinary 6 naturally aspirated. It also saves fuel.
3. Kia FordDi is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
4. Hello, this is a domestic engine. I wish you a pleasant drive.
1. Fredi provides two engine options. Among them, the maximum power of the 5L naturally aspirated engine is 82 kW, and the maximum torque is 148 N·m, which is matched with a 5-speed manual or 4-speed automatic transmission; the maximum power of the 5L turbocharged engine is 110 kW and the maximum torque is 210 N·m, which is matched with a 6-speed manual or 6-speed automatic transmission.
2. Yes. Kia Ford is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
3. The turbocharged engine is actually more suitable for driving on city roads, which can output the maximum torque at very low speeds. However, the maintenance cost of the naturally aspirated engine is lower, and the reliability and durability of this engine are also better.
4. The original oil label of Kia Fredi is 5W40, and 10W40 can also be used, mainly depends on the environment of the owner. If the temperature is below -25°C, it is recommended to use 5W40 model oil. Self-priming engines do not have high requirements for oil. Mineral oil and semi-synthetic oil can be used. If you have a large budget, you can use fully synthetic oil.
5. I agree that turbocharging is conducive to improving combustion quality, reducing emissions and improving engine power! However, because the turbocharger and the engine are two power machines of different nature, they are connected by in and out, attention should be paid to the mutual influence of their respective properties and the impact of the matching on the performance of the whole machine.
6. Geely Binyue is a very good small SUV. It is equipped with 0T and 4T power, and the overall performance is relatively smooth. The power performance is quite good. It should be noted that its speed can reach 190km/h.
Kia Fredi idling jitter shutdown, the reason for the engine jitter: the engine foot glue is aging or loose. The foot glue is the rubber block cushioned between the engine and the frame. Its function is to reduce the vibration and buffering of the engine during work, and to fix the engine.
The reason for stepping on the brake idling jitter and turning off the engine: the idling switch does not close fault analysis: when the idling contact is disconnected, the ECU determines the startThe machine is in a partial load state. At this time, the ECU determines the fuel injection volume and fuel injection time according to the air flow sensor and the crankshaft position and speed signal.
The reasons are as follows, which may be caused by too much carbon in the engine.
No idling speed may be due to the fact that the throttle valve is too dirty, causing the engine to have insufficient air intake and then turn off. Brother, is there anything wrong with the car inspection? I'm in the situation now. It takes too long to start the car with one click. Gear D waits for the traffic light, and the engine shakes twice and the engine turns off.
Shaking when idling in the morning. The hot car has improved. Phenomenon: When the car is launched in the morning, the engine shakes more than normal, and sometimes there will be a problem of not being able to start. Reason: It is possible that the throttle valve is too dirty, and there is too much carbon accumulation in the fuel injector and intake duct.
715.87MB
Check499.62MB
Check571.56MB
Check154.34MB
Check138.64MB
Check695.17MB
Check547.52MB
Check433.73MB
Check767.51MB
Check779.68MB
Check724.43MB
Check875.45MB
Check664.99MB
Check953.59MB
Check945.99MB
Check328.51MB
Check451.11MB
Check139.27MB
Check287.73MB
Check482.14MB
Check379.85MB
Check871.55MB
Check355.21MB
Check436.86MB
Check622.17MB
Check358.38MB
Check282.73MB
Check937.51MB
Check759.89MB
Check122.27MB
Check867.86MB
Check254.64MB
Check432.49MB
Check248.26MB
Check733.81MB
Check716.96MB
CheckScan to install
Binance wikipedia to discover more
Netizen comments More
2206 水滴石穿网
2025-02-01 02:51 recommend
582 泪如泉涌网
2025-02-01 02:41 recommend
442 烈火真金网
2025-02-01 02:41 recommend
1140 兴风作浪网
2025-02-01 01:00 recommend
1006 小题大作网
2025-02-01 00:39 recommend