1. There are two reasons why the computer cannot install the system: hardware reasons. This mainly checks all kinds of interfaces and hard disk interfaces. Remove excess hardware temporarily, such as optical drives and excess hard disks.
2. There are many reasons for the failure of the installation system. You can check from the following aspects. Check the hardware temperature, check whether the temperature of the CPU and graphics card is too high, remove dust and oil the fan. Clean up the slot. Use the eraser to wipe the network card, graphics card, sound card gold finger, clean up the slot, plug it back in, and you can also change the slot.
3. There is a problem with the motherboard: This situation generally occurs in some older motherboards. Let me tell you a method. You can first copy the mirror file to the hard disk on a good computer, but don't install it. Just take it to the original host and install it.
4. Check whether the installation CD is correct. Sometimes, the computer can't install the system because the installation CD is damaged or read incorrectly. At this time, we need to use other installation CDs to solve the problem.Check the BIOS settings.
1. **Error code 0x80070570**: This indicates that there may be file damage or read and write errors. You can try to solve this problem.Re-download the Windows 10 installation file, check whether the installation medium is intact, or remake the USB installation disk.
2. Win10 cannot install the solution. Solution 1: After the above problem occurs, directly unplug the USB disk and plug it into another computer, delete the efi folder and bootmgr.efi file in the USB disk, and the problem will be solved. Then, use this USB disk boot disk to install The system will not have this kind of problem.
3. In the Win10 system, when opening the system update interface, it prompts to restart, but after restarting, it still cannot be installed. We can right-click the start button in the lower left corner of Windows 10 and select the "Run" menu item in the pop-up menu.
4. If the system installation CD contains UEFI information, it may automatically load and enter UEFI mode at startup, so it will appear "windows cannot be installed on this disk. The selected disk has an MBR partition table. On the EFI system, windows can only be installed to G The prompt of "FT disk".
Take the Lenovo model as an example, press Del or F1 to enter the BIOS at startup, switch to the Boot interface, select 1st Boot Device to enter, pop up the Options dialog box, and select Hard Drive to enter to confirm.
SolveMethod: Enter the BIOS and find SATAMODE and change it to IDE mode before installing. After installation, if you want to change back to SATA mode, you need to download the driver of AHCI first and then change it back.
- Back up your important data, because installing the XP system will format the hard disk, resulting in data loss. Get the XP system installation CD or ISO image: - If you have the XP system installation CD, you can use it directly.
Reasons and handling methods for not being able to install the XP system: (1) The reason for not being able to install XP is caused by different hard disk modes.
Binance exchange-APP, download it now, new users will receive a novice gift pack.
1. There are two reasons why the computer cannot install the system: hardware reasons. This mainly checks all kinds of interfaces and hard disk interfaces. Remove excess hardware temporarily, such as optical drives and excess hard disks.
2. There are many reasons for the failure of the installation system. You can check from the following aspects. Check the hardware temperature, check whether the temperature of the CPU and graphics card is too high, remove dust and oil the fan. Clean up the slot. Use the eraser to wipe the network card, graphics card, sound card gold finger, clean up the slot, plug it back in, and you can also change the slot.
3. There is a problem with the motherboard: This situation generally occurs in some older motherboards. Let me tell you a method. You can first copy the mirror file to the hard disk on a good computer, but don't install it. Just take it to the original host and install it.
4. Check whether the installation CD is correct. Sometimes, the computer can't install the system because the installation CD is damaged or read incorrectly. At this time, we need to use other installation CDs to solve the problem.Check the BIOS settings.
1. **Error code 0x80070570**: This indicates that there may be file damage or read and write errors. You can try to solve this problem.Re-download the Windows 10 installation file, check whether the installation medium is intact, or remake the USB installation disk.
2. Win10 cannot install the solution. Solution 1: After the above problem occurs, directly unplug the USB disk and plug it into another computer, delete the efi folder and bootmgr.efi file in the USB disk, and the problem will be solved. Then, use this USB disk boot disk to install The system will not have this kind of problem.
3. In the Win10 system, when opening the system update interface, it prompts to restart, but after restarting, it still cannot be installed. We can right-click the start button in the lower left corner of Windows 10 and select the "Run" menu item in the pop-up menu.
4. If the system installation CD contains UEFI information, it may automatically load and enter UEFI mode at startup, so it will appear "windows cannot be installed on this disk. The selected disk has an MBR partition table. On the EFI system, windows can only be installed to G The prompt of "FT disk".
Take the Lenovo model as an example, press Del or F1 to enter the BIOS at startup, switch to the Boot interface, select 1st Boot Device to enter, pop up the Options dialog box, and select Hard Drive to enter to confirm.
SolveMethod: Enter the BIOS and find SATAMODE and change it to IDE mode before installing. After installation, if you want to change back to SATA mode, you need to download the driver of AHCI first and then change it back.
- Back up your important data, because installing the XP system will format the hard disk, resulting in data loss. Get the XP system installation CD or ISO image: - If you have the XP system installation CD, you can use it directly.
Reasons and handling methods for not being able to install the XP system: (1) The reason for not being able to install XP is caused by different hard disk modes.
286.28MB
Check892.28MB
Check749.77MB
Check929.51MB
Check441.31MB
Check126.76MB
Check765.98MB
Check933.43MB
Check753.25MB
Check176.72MB
Check823.17MB
Check961.76MB
Check961.65MB
Check265.52MB
Check285.12MB
Check213.16MB
Check937.31MB
Check671.77MB
Check119.83MB
Check339.42MB
Check199.13MB
Check789.55MB
Check122.34MB
Check994.53MB
Check457.58MB
Check436.26MB
Check297.68MB
Check821.87MB
Check736.55MB
Check292.61MB
Check168.82MB
Check766.45MB
Check511.32MB
Check179.62MB
Check961.68MB
Check822.79MB
CheckScan to install
Binance exchange to discover more
Netizen comments More
1683 下愚不移网
2025-02-01 01:41 recommend
2359 观过知仁网
2025-02-01 00:46 recommend
847 安不忘危网
2025-02-01 00:40 recommend
1135 牛鼎烹鸡网
2025-02-01 00:27 recommend
643 经天纬地网
2025-02-01 00:22 recommend